Turbine Types Explained: Pelton, Turgo, Crossflow and Kaplan
Why turbine choice starts with head and flow
On a small UK hydro scheme, the two numbers that matter most are head and flow. Head is the vertical drop between the intake and the turbine. Flow is the volume of water available each second. Together they decide how much power you can generate and which turbine will work best. Get the match wrong and you lose output, or you pay for a machine that never runs at its design point.

The British Hydro approach is simple: measure first, then choose. A site with a steep drop and modest flow behaves very differently from a lowland river with plenty of water but little fall. The turbine types below cover almost every small scheme in the UK.
Pelton: the high-head specialist
A Pelton turbine uses one or more jets of water fired at buckets around a wheel. It is the classic choice for high head, typically above 60 metres, and lower flows. Because the runner sits above the tailwater, it is easy to inspect and maintain.
If your site has a steep hillside and a stream that never dries, a Pelton is often the most efficient option. It also handles wide flow variation well by switching jets on and off.
- Best for high head, low to medium flow.
- Simple maintenance and good part-load efficiency.
- Not suitable for low-head sites.
Turgo: the middle ground
The Turgo runner looks similar to a Pelton but the jet hits the buckets at an angle. This lets it handle more flow for the same diameter and spin faster, which can reduce gearbox costs. It sits comfortably between Pelton and crossflow in terms of head and flow.
For UK sites with head between roughly 15 and 60 metres, the Turgo is often the sweet spot. It tolerates some debris better than a Pelton and is compact for its power output.
"Match the turbine to the site, not the site to the turbine."
Crossflow: robust and forgiving
A crossflow turbine, also called a Banki-Michell, passes water through a drum-shaped runner twice. It is cheap to build, tolerant of silt and trash, and works well at low to medium head with medium to high flow. Efficiency is lower than a Pelton or Turgo, but it keeps running when conditions are imperfect.
Many small UK schemes on rivers with variable flow use a crossflow because it copes with the seasonal changes that British weather delivers.
Kaplan: the low-head workhorse
Kaplan turbines are propeller machines with adjustable blades. They are designed for low head, often under 15 metres, and high flow. In the UK they suit weirs, canals and lowland rivers where the drop is small but the volume is large.
Because the blades adjust, a Kaplan keeps good efficiency across a wide range of flows. That matters on rivers where summer and winter flows differ hugely.
Comparing the options
| Turbine | Typical head | Typical flow | Best for |
|---|---|---|---|
| Pelton | High, 60 m+ | Low | Steep upland streams |
| Turgo | Medium, 15-60 m | Medium | Mid-head hillside sites |
| Crossflow | Low to medium | Medium to high | Variable river flows |
| Kaplan | Low, under 15 m | High | Weirs and lowland rivers |
Before you buy, follow this order:
- Measure head accurately with a level or pressure gauge.
- Assess flow across the year, not just in winter.
- Check for debris, access and grid connection.
- Match the turbine type to those figures.
If you are unsure, a site survey from British Hydro will confirm the right technology for your head and flow. The right match turns a good site into a reliable, long-term generator.
